Paper reels and paper planning
Receive and test kraft reels, issue them to the corrugator, buy paper for won jobs, and pair jobs on the deckle to cut trim.
Reels
Every kraft reel is tracked on its own: paper, width, weight, mill and age.
Receive a reel
Under Reels, click Receive a reel. You can Scan the mill label to fill in the details, then check the values. Enter the Reel number, paper (GSM and BF), Width (mm), Weight (kg), mill, and the GRN or challan number. Reels received on a goods receipt in Purchase are picked up too.
Incoming QC
A new reel waits for QC. Record the Moisture % and result: Pass, or Fail → hold. Production can't use a reel that is on hold or rejected.
Issue and return
Send to the corrugator when a reel goes on the machine, against a job if you like. When it comes back part-used, Weigh the reel: stock is set to the scale weight, and the difference is kept as an adjustment, so you can compare planned paper with actual.
Print new labels for reels. The reels screen shows Stock by paper and reel width (kg) and flags reels Older than 90 days.
Paper planning
Planning → Paper works out the paper that won orders and planned runs need, against what's in stock and On order, and shows what's short. Tick Include quotes not yet won to plan ahead.
Click Make draft purchase orders for the shortfall. The drafts go to Purchase; check the rates and issue them there. With the autopilot on, this also runs every morning at 7:30 by itself.
Deckle planning
Planning → Deckle finds jobs that can Run together on one reel width, so less paper is lost to trim. It shows the best reel, the Trim saved by pairing, and the paper saved, compared with running each job on its own.