Steel Service Centre ERP Software

Steel Service Centre ERP Software coil ID and heat number on every bundle

Steel service centres and processors — HR, CR and GP coils by coil ID and heat, slitting and cut-to-length runs, thickness and flatness checks, weight-wise stock and dispatch in one system, with GST billing built in.

Coil-wise
ID, heat and weight
Bundle-wise
size, grade and weight
Tonne-wise
yield and scrap
A run at a glance

Every production run, from materials to dispatch

The run carries its bill of materials, the material lots it used, the processing record filled step by step, the QC tests and the release — so production, QA and dispatch work from the same record.

  • Materials checked against stock before the run starts
  • Every step performed by one person and verified by another
  • Batch released only when every test passes, then shipped batch-wise

What is software for steel service centres?

Steel Service Centre ERP Software runs a steel service centre in one system: HR, CR and GP coils by coil ID, heat number and weight, the coil per bundle, slitting, shearing and cut-to-length runs, the processing record, thickness, size and flatness checks, and dispatch by weight to OEMs and traders — with GST invoices, e-way bills and the accounts on the same records.

ERP Group keeps grade, thickness, width, length and the IS standard on each product, works out the coil weight a run needs, flags a shortage before uncoiling, and shows yield and scrap per run.

Last updated: October 2026 · features as they work in ERP Group today

Key facts

Built for Steel service centres, slitting and cut-to-length processors, coil traders
Bill of materials Coil weight, oil and packing per tonne, with scrap
Quality Thickness, Width / length, Flatness
Processing record Coil inspection & ID to Bundling & weighing, each step verified
Accounts GST invoices, e-way bills, books; or export to Busy or Tally
Features

What ERP Group does for a steel service centre

Materials, production, quality and dispatch on one set of screens — with the stock and the books kept up to date as you go.

Grades and sizes

  • Grade, thickness, width and length
  • IS standard and surface
  • Coil weight per tonne with scrap
  • Mill test certificates attached

Coil yard

  • Coils by coil ID, heat and weight
  • Oil, straps and pallets
  • Purchase orders and goods receipt
  • Reorder levels with draft orders

Line runs

  • Plan a run on each line
  • Shortage shown before the run starts
  • Material lots issued to the run
  • Labour hours and actual output recorded

Processing record

  • Coil inspection & ID, Uncoiling & levelling, Slitting / shearing and more
  • Each step performed and verified by two people
  • Deviations recorded on the batch
  • Locked once the batch is released

Quality checks

  • Thickness, Width / length
  • Flatness
  • Release, reject or raise a non-conformance
  • Test reports attached to the batch

OEMs and traders

  • Orders from OEMs, fabricators and traders
  • Dispatch by weight with coil and heat IDs
  • GST invoice, e-invoice and e-way bill
  • Outstanding and collections per customer
See It in the App

What do the centre screens look like?

Real screens from an ERP Group demo steel service centre — the sheets and slit coils, materials and batches are demo data.

Shakti Steel Processors · Overview
ERP Group steel service centre — Manufacturing overview screen View larger

Manufacturing overview

Open runs, batches waiting for QA, released and rejected batches, average yield and deviations — with yield by recent run.

  • Yield against tolerance
  • Quality disposition at a glance
  • Runs by status
Shakti Steel Processors · Production runs
ERP Group steel service centre — Production runs screen View larger

Production runs

Every run with its product, batch number, quantity, line and status — planned, in progress or completed.

  • Plan a run from the BOM
  • Filter by status or product
  • Open any run for its record
Shakti Steel Processors · One run
ERP Group steel service centre — One production run screen View larger

One production run

The run for CRCA Sheet 1.0 × 1250 × 2500 mm: planned quantity, target batch, line and supervisor, with every material checked against stock — CRCA Coil 1.0 mm × 1250 mm (IS 513) is short.

  • Shortage shown before you start
  • Labour hours booked to the run
  • Start, close, QC and release
Shakti Steel Processors · Bill of materials
ERP Group steel service centre — Bill of materials screen View larger

Bill of materials

What goes into a bundle of CRCA sheets: each material with its quantity, wastage and stock, in versions — plus the routing on your lines.

  • Versions kept, old runs unchanged
  • Wastage % per material
  • Routing steps on work centres
Shakti Steel Processors · Processing record
ERP Group steel service centre — Processing record screen View larger

Processing record

Every step of batch CTL-2609-63: what was expected, what was observed, who performed it and who verified it — closed once the batch is released.

  • Two people per step
  • Deviations block the release
  • Locked after release
Shakti Steel Processors · QC and release
ERP Group steel service centre — QC and release screen View larger

QC and release

Theoretical against actual quantity, every QC test with its specification and result, test reports attached, and the release decision.

  • Pass / fail against the spec
  • Non-conformance and CAPA
  • Released for dispatch
Watch the demo

See a plant run on ERP Group

A walk-through of the production screens — shown for a general manufacturing unit; steel service centre businesses work in the same screens, with their own materials, steps and tests.

  • PlanBills of materials and production runs
  • Make and checkBatch record, QC tests and release
  • DispatchSales orders, invoices and shipments by batch
More demos on our channel
Quality

Thickness, size and flatness before a bundle is weighed

Each batch has a processing record with these steps, and QC tests against your specification. A step needs a second person to verify it, and the batch cannot be released while a step is open or a test has failed.

Coil inspection & IDHeat / coil no., mill TC verified
Uncoiling & levellingFlatness ≤ 3 mm/m
Slitting / shearingWidth / length +2 / −0 mm
Burr & edge checkBurr ≤ 5% of thickness
OilingUniform RP oil film
Bundling & weighingTagged with coil no. and weight
ThicknessWithin IS tolerance (1.0 ± 0.06 mm) — Micrometer, 5 points
Width / length+2 / −0 mm — Tape
QA releaseReleased only when every step is verified and every test passes
Compare

How is ERP Group different from Excel and Tally, or a separate production package?

Most steel service centres plan production in Excel and keep the accounts in Tally or Busy, or buy a production package that does not talk to the books. Here is what changes when it is one system.

What you need Excel + Tally / BusyThe usual start Production package + TallyTwo systems ERP GroupOne system
Bill of materials with wastage, in versions A sheet per product Yes Yes, old runs keep their version
Material shortage before the run starts Found on the floor Varies Yes, checked against live stock
Processing record: who did each step and who checked it Paper registers Varies Yes, two people per step
QC tests and release before dispatch Lab register Usually Yes — no release, no dispatch
Material lots used in each batch Not recorded Partly Yes, lot by lot
GST invoice, e-invoice and e-way bill Typed again in Tally Entered again in Tally From the sales order itself
Purchase orders, goods receipt and reorder levels In Tally, by hand Varies Yes, draft orders when stock runs low
Books, GST data and bank reconciliation In Tally, separately In Tally, kept in step by hand Built in — or export to Busy / Tally
Payroll, CRM, dealers and the rest More software More software Same login, add when needed

"Varies" and "usually": production packages differ — ask your vendor. ERP Group columns are what the software does today.

See it on a demo
One Platform

The modules a steel service centre runs on

Production shares its materials, batches and invoices with the rest of ERP Group.

Inventory & Warehouse

Stores, bins and stock by lot — raw materials, work in progress and finished goods.

Warehouse management

Purchase

Purchase orders to mills, stockists and packing suppliers, goods receipt, reorder levels and draft orders.

Purchase management

Accounting & GST

Purchase bills, sales invoices, ledgers, GST data and bank reconciliation.

Accounting software

E-Invoice & E-Way Bill

IRN and signed QR on every invoice, e-way bills for each dispatch.

E-invoice & e-way bill

Dealer Management

Your dealers and distributors, their orders, schemes and outstanding.

Dealer management

Traceability

Batch QR codes, shipments by batch, and a recall that finds every customer.

Traceability software
How It Works

How does a steel service centre start on ERP Group?

01

Slit coils, sheets and blanks and materials

Your sheets and slit coils with their specifications, materials with suppliers, stores and bins.

02

Bills of materials

What goes into each product per tonne, with wastage — and the processing record steps.

03

Plan and run

Plan a run, check materials, issue lots, fill the record, test and release.

04

Sell and dispatch

Sales orders, GST invoices and e-way bills, shipped batch-wise to your customers.

Keep exploring

More for manufacturers

All industries

Sheet metal fabrication

Laser, bending, welding and powder coating.

Read more

Forging

Bars into forgings with heat treatment and MPI.

Read more

Distribution & logistics

Trucks, routes and e-way bills for distributors.

Read more

Free HSN / SAC finder

Look up the HSN for steel coils and sheets.

Try it free

See your centre on ERP Group

Tell us which grades you process and which lines you run. We'll show you a coil from receipt to slitting, checks and dispatch by weight on a demo service centre.

Common Questions

Steel Service Centre ERP Software — frequently asked questions

ERP Group is a cloud ERP made in India with an industry setting for steel service centre businesses. It adds 11 steel service centre fields to products, production and quality checks, alongside purchase, stock, GST invoicing, e-way bills and accounting in one system.

The Steel Service Centre fields are grouped as Item type, Mother coil and Processed product. They include Item type, Grade, Thickness (mm), Coil width (mm), Mill, Heat / coil no. tracked, Size (W × L), Process and more. Fields such as Item type, Grade and Thickness are also shown in product lists.

ERP Group includes 6 one-click quality-check presets for steel service centre: Thickness, Width / length, Burr height, Flatness, Camber and Surface. Each preset fills in the test method and the specification from the product.

Yes. Selection lists such as Grade, Thickness and Mill come with common values and can be extended with your own, so the lists match the materials and products you actually use.

Set the company's industry to Steel Service Centre in its company profile. Companies without an industry keep the standard forms; once Steel Service Centre is set, the industry fields appear on products, production and quality checks.

Yes. Products carry their HSN codes and GST rates into sales orders and GST invoices, and ERP Group can generate e-invoices (IRN with a signed QR code) and e-way bills from the invoice.